GlobalRANGE 5 3D Laser Scanner
A non-contact cost effective 3D scanner
The KONICA MINOLTA RANGE 5 3D laser scanner is designed for companies that are seeking a more economical solution to non-contact 3D measurement without compromising on high performance and quality. The Konica Minolta line of scanners delivers.
Dark surface mode
Measurements of objects with reflectance as low as 2.5% can now be performed without the use of special darkrooms or spraying of the object thanks to the dark surface mode function, which achieves the top level of low reflectance performance in the industry. In addition, the dark mode function eliminates the need for spraying and the measurement inaccuracies caused by the uneven thickness of the sprayed layer. Work efficiency is drastically improved by rendering pre-measurement surface preparation (spraying) and post-measurement surface cleaning unnecessary. Environmental load is in turn reduced since spray and cleaning liquids are not used.
Field-oriented robust design with a high accuracy of ±40 μm and a 1.31 million-pixel sensor!
How does the RANGE 5 achieves the highest level of guaranteed accuracy for a non-contact camera type 3D measurement instrument? By detecting finely detailed shapes as well as newly designed optics by utilizing a the new 1.31 megapixel CMOS sensor. According to ball bar accuracy testing based on VDI/VDE 2634 guidelines,the RANGE 5 provides an accuracy of ±40 μm.
Designed with the concept of on-site use, the Range 5 minimizes the influence of temperature change, instrument tilt, and other variables at the time of measurement, providing high reliability in actual-use environments such as factories and other on-site locations.
Fast two-second scanning and 3D preview function!
High-speed scanning is performed at approximately 2 seconds per shot thanks to the Range 5 original high-speed processing circuits. The 3D preview function allows users to predict the measurement results and check for scan area dead angles, depth, and other scan problems due to surface conditions or similar irregularities. Checking for these beforehand greatly reduces scanning errors.
All-in-one unit weighing only 6.7 kg is compact and lightweight!
The Range 5 compact, lightweight design enables the camera and controller to be integrated into a single body weighing approximately 6.7kg, less than half that of previous models. This allows high mobility in measurement environments. Furthermore, by using the optional stand, the RANGE 5 can be easily moved to a variety of environments when necessary and measurements can be taken for stress-free work.
- Measuring method
- Triangulation light block method
- Light source
- Semiconductor laser; Wavelength: 660nm
- Laser class
- Class 2 (IEC60825-1 Amendment 2)
- Number of pixels taken
- 1.31 megapixels (1280×1024)
- Measurement distance
- 450mm to 800mm
- Accuracy (Distance between balls)*1
- ±80µm
- Precision (Z, s)*2
- 8µm
- Autofocus
- Yes
- Autoexposure
- Yes
- Scan time
- Approx. 2 sec. (1 scan)
- Preview function
- Yes (Approx. 0.4 sec./scan)
- Ambient lighting condition
- 500lx or less
- Output interface
- USB 2.0 High Speed
- Power
- Included AC Adapter
Input voltage: AC 100 to 240V (50/60Hz)
Rating: 1.4A (at AC 100V input)
- Dimensions
- 295 (W) × 190 (H) × 200 (D) mm (Not including grips and lens)
- Weight
- Approx. 6.7kg
- Operating temperature/humidity range
- 10 to 40°C; Relative humidity 65% or less with no condensation
- Storage temperature range
- -10 to 40°C; Relative humidity 85% (at 35°C) or less with no condensation
*1 When measuring distance between balls for a ball bar as defined in VDI/VDE 2634-2 under Konica Minolta measurement conditions.
Konica Minolta measurement conditions: Temperature: 20±1°C; Lens: TELE; Measurement distance: 450mm; Warmup: 20 min.; Software used: Konica Minolta processing software; After calibration of instrument; Measurement subject: Konica Minolta standard (2 balls); Arrangement of measurement subject: Konica Minolta standard arrangement (10 locations inside measurement space); Uncertainty of standard not included
*2 Measurement conditions: Temperature: 20±1°C; Lens: TELE; Measurement distance: 450mm; Warmup: 20 min.; Measurement subject: Konica Minolta standard planar chart; Software used: Konica Minolta processing software; 1s value
Specifications of Konica Minolta 3D Data Processing Software RANGE VIEWER
- Readable formats
- Konica Minolta proprietary formats .rgv (Single-scan data cloud), .rvm (multiple data)
- Data output
- ASCII point group; Binary point group (including normal vectors)
Konica Minolta proprietary formats .rgv, .rvm
- Measurement functions
- Monitor image; Preview; AF/AE; Measurement
Control of rotary stage (Konica Minolta optional accessory)
- Editing functions
- Data alignment; Data merging; Point group deletion
- Drawing
- Point group shading
- OS
- Windows Vista 64-bit Business SP1(x64)
Windows XP Professional SP2(x64)
- CPU
- Core2Duo, Xeon, or better
- RAM
- 4GB or more
- Display
- Graphics display capability of 1280×1024 or more
- Graphics board
- OpenGL compatible board (verified-compatible board recommended)
- Interface
- USB 2.0 port
Specifications and appearance shown herein subject to change without notice.
Product names used herein are trademarks or registered trademarks of their respective companies.
No accessories for this product.
