The Konica Minolta Spectrophotometer CM-26d (dual aperture model) and Spectrophotometer CM-25d (single aperture model) are essential color measurement instruments for digital color data management within global supply chains. These advanced spectrophotometers offer accurate and consistent color measurements, ideal for various applications like automotive interiors, the exterior of smartphones and tablets, ceramics, and more.

Spectrophotometer CM-26d / CM-25d

The Konica Minolta Spectrophotometer CM-26d and Spectrophotometer CM-25d, with d:8° geometry and horizontal alignment, are designed for color measurement of various samples such as automotive interior parts and trims, small plastic parts, electronic devices, ceramics, and more. These spectrophotometers provide high accuracy and repeatability for consistent digital color data management within a supply chain.

With tight inter-instrument agreement levels of ∆E*ab< 0.12 (CM-26d) and high repeatability of σ∆E*ab 0.02 (CM-26d), the CM-26d and CM-25d ensure precise color measurement results. In addition, the CM-26d and CM-25d are designed with user-friendly features for easy and efficient operation. The viewfinder allows for precise positioning on small or difficult-to-measure samples, while the symmetrical and compact design makes it suitable for measuring in tight spaces, e.g., vehicle interior.

The Configuration Tool CM-CT1 software (standard accessory) further enhances the capabilities of these spectrophotometers by allowing users to create and share instrument settings among instruments. When used together with Spectramagic NX or Spectramagic NX2 software, the CM-26d and CM-25d enable users to create workflow instructions with images, streamlining the communication and standardization of color measurement processes.

Spectrophotometer CM-26d / CM-25d

  • di:8°, de:8° (diffused illumination, 8° viewing angle)
  • High Inter-Instrument Agreement(IIA)
    • ∆E*ab< 0.12; Average of BCRA 12 Tiles (CM-26d)
    • ∆E*ab< 0.20; Average of BCRA 12 Tiles (CM-25d)
  • Changeable measuring apertures -Ø8mm or Ø3mm measurement areas (CM-26d)
  • Viewfinder for easy target alignment
  • JOB function*1 for creating workflows (with graphical instructions)
  • Configuration Tool CM-CT1 software (standard accessory)
  • Bluetooth ready

*1 Setting enabled by SpectraMagic NX (Ver. 2.9 or later, sold separately).

 

Spectrophotometer CM-26d / CM-25d

ModelCM-26dCM-25d
Illumination/ viewing systemdi: 8°, de: 8° (diffuse illumination: 8° viewing)

SCI (specular component included) / SCE (specular component excluded) switchable

Integrating sphereØ54 mm
Light sourcePulsed xenon lamp ×2Pulsed xenon lamp ×1
DetectorDual 40-element silicon photodiode arraysDual 32-element silicon photodiode arrays
Spectral separation devicePlanar diffraction grating
Measurement Wavelength range360 to 740 nm400 to 700 nm
Measurement Wavelength pitch10 nm
Half bandwidthApprox. 10 nm
Reflectance Measurement range0 to 175%; Display resolution: 0.01
Illumination areaMAV : Ø12 mm

SAV : Ø6 mm

MAV : Ø12 mm
Measurement areaMAV: Ø8 mm

SAV: Ø3 mm

MAV : Ø8 mm
RepeatabilityStandard deviation within ΔE*ab 0.02Standard deviation within ΔE*ab 0.04
(When a white calibration plate is measured 30 times at 5-second intervals after white calibration)
Inter-instrument agreementWithin ΔE*ab 0.12Within ΔE*ab 0.20
(Based on average for 12 BCRA Series II color tiles; MAV SCI; compared to values measured with a master body under KONICA MINOLTA standard measurement conditions)
UV adjustment100% / 0% / Adjusted (Instantaneous numerical adjustment of UV with no mechanical filter movement required)*1 ; 400nm UV cutoff filter0% only; 400 nm UV cutoff filter
Observer2° observer angle, 10° observer angle
IlluminantA, C, D50, D65, F2, F6, F7, F8, F10, F11, F12, ID50, ID65, User-defined illuminant*2

(Simultaneous evaluation with two light sources possible)

Display itemsColorimetric values/graph, color difference values/graph, spectral graph, pass/fail judgment, pseudocolor
Colorimetric valuesL*a*b*, L*C*h, Hunter Lab, Yxy, XYZ, and color difference in these spaces; Munsell (C)
IndicesMI, WI (ASTM E313-73), YI (ASTM E313-73, ASTM D1925),
ISO brightness (ISO 2470), WI/Tint (CIE/Ganz), Strength, Opacity,
Grey scale (ISO 105-A05), 8° gloss value, User index *2
MI, WI (ASTM E313-73), YI (ASTM E313-73, ASTM D1925),
ISO brightness (ISO 2470), WI/Tint (CIE), Strength, Opacity,
Grey scale (ISO 105-A05), 8° gloss value, User index *2
Color difference equationsΔE*ab (CIE1976) / ΔE94 (CIE1994) / ΔE00 (CIE2000) / CMC (l:c) / Hunter ΔE / DIN99o
Applicable standardsDIN 5033 Teil 7, JIS Z 8722 Condition “c”, ISO 7724/1, CIE No.15
Measurement timeApprox. 0.7 sec. (Measurement mode: SCI or SCE)

(From pressing trigger button to measurement completion)

Minimum measurement intervalApprox. 1.5 sec (Measurement mode: SCI or SCE)
Data memory1,000 target data + 5,100 sample data
Battery performanceMeasurement mode: SCI or SCE

Approx. 3,000 measurements (approx. 1,000 measurements when using Bluetooth) when measurements are taken at 10-second intervals at 23°C with the dedicated lithium battery

Viewfinder functionAvailable (with white LED illumination)
Display2.7″ color TFT-LCD with reversible portrait viewing mode
Display languageEnglish, Japanese, German, French, Italian, Spanish, Simplified Chinese, Portuguese, Russian, Turkish, Polish
InterfaceUSB 2.0; Bluetooth (SPP-compatible. Optional Bluetooth module required)
PowerDedicated lithium-ion battery (removable), USB bus power (with lithium-ion battery installed),
Dedicated AC adapter (with lithium-ion battery installed)
Charging timeApprox. 6 h
Operating temperature/ humidity rangeTemperature: 5 to 40°C, Relative humidity: 80% or less (at 35°C) with no condensation
Storage temperature/ humidity rangeTemperature: 0 to 45°C, Relative humidity: 80% or less (at 35°C) with no condensation
SizeApprox. 81 (W) × 93 (H) × 229 (D) mm
WeightApprox. 630 gApprox. 620 g

Specifications are subject to change without prior notice.

*1 Firmware version 1.10 or later and optional Color Management Software SpectraMagic NX (Ver.3.0 or later) is required to use UV Adjusted setting.

*2 Optional Color Management Software SpectraMagic NX (Ver.2.9 or later) is required for setting user-configured illuminants or user indexes.

 

Spectrophotometer CM-26d / CM-25d

Catalog Download: Download PDF (3.5MB)

Owner’s Manual: Download PDF (16.4MB)

Spectrophotometer CM-26d/CM-25d



    All fields marked with an (*) are required.


    *Your data will be processed in accordance with our Privacy Policy.
    *Email us directly with any form submission problems